article
June 3, 2021
4 min read
0 views
Touchscreen Calibration and Debounce on an STM32 With FT6236
Capacitive touch with the FT6236 controller over I2C is well-supported but the calibration matrix and interrupt debounce require careful implementation for a smooth UI.
Capacitive touch with the FT6236 controller over I2C is well-supported but the calibration matrix and interrupt debounce require careful implementation for a smooth UI.
Overview
This note is part of the field-notes archive generated for this site. The summary below is the published excerpt; you can expand the full write-up anytime in the CMS.
Related notes
Tags
- touchscreen
- stm32
- i2c
- embedded
- hmi
M
Manish Bookreader
Electronics enthusiast, Embedded Systems Expert, Linux/Networking programmer, and Software Engineer passionate about AI, electronics, books, and cooking.
